1left - 1 speed pump replaces 02010000-1010 and 02010000-1010HZW. Gecko/Aquaflo pump with Century motor.
Gecko Flo-Master CP Pump 02010000-1010 1HP continuous duty,115V, 1-speed spa pump.
This new 48 frame 1HP Pump can replace 1431501-03 Watkins pump with modification - see below.
Also replaces 02010000-1010 , 3410410-0Z , 5121-429,02010422-5, 303001,Watkins 1431501 1431501-03 and 1431501-01
Speed |
1 Speed (1-Speed) |
Motor Voltage |
115v |
Drain Plug Location |
6,9 o`clock |
Pump to Motor Foot Types |
15 |
Suction Style |
Center |
Suction Connection (Physical Dimension) |
1-7/8"id, 2-7/16"od |
Suction Connection Type |
Female Pipe Thread (fpt), Male Buttress Thread (mbt) |
Suction Pipe Size |
1-1/2" |
Discharge Style |
Side |
Discharge Connection (Physical Dimension) |
2-7/16"od |
Discharge Connection Type |
Male Buttress Thread (mbt) |
Discharge Pipe Size |
1-1/2" |
Horsepower |
1.0 hp |
Motor Frame |
48 Frame Thru-Bolt |
Motor Amperage/Wattage |
9.0 amps
|
Manufacturer |
AquaFlo/Gecko |
Pump Model |
Flo-Master FMHP
|
Tech note: if replacing 1431501-03 Watkins pump or select older style pumps with built in activator switches - the internal switch can be bypassed by removing the two wires from the switch and twisting them together inside a wire nut creating the connection between the 2 wires without a switch. Contact your installer or electrician with questions about this modification.
2) is the replacement o-ring if needed O-287.
You may need o-rings - O-287
Once gone, see alternate circ pump WBC150
Or see the wet end 91040700-000 and the single speed motor bn25v1 and connect them together with the included 4 motor bolts to create this single speed pump.
Or see/compare 1HP pump 2-speed 115v 02110000-1010 that can be operated as either a 1-speed or 2-speed pump.
If operating as a 1-speed pump, leave the low speed pump terminal unconnected. With only the high speed terminal connected, it will function as a 1-speed pump.
1HP 115V 1 Speed Gecko Flo-Master CP Pump 02010000-1010